B.O.D INCUBATORS (LI-BOD-ADV)
May 21, 2016HOT AIR UNIVERSAL OVEN (MEMMERT TYPE) (LI-HAO-1)
May 21, 2016
- Stainless steel inner chamber
- Four square semicircle transition, convenient to clean ;
- Micro-computer control system; LCD display with functions of time setting, parameter memorizing and power reset recovering. (Optional)
- CFC-free refrigeration and gentle breeze circulation.
- Double door seal, tempered glass, silicon rubber seal,
- Inner & Outer door with magnetic rubber seal.
- Inner chamber with light for convenient observation.
Most versatile for Biochemical Oxygen Demand determinations. Castor wheel mounted cabinet is double walled with inner chamber S.S. and outer wall of M.S. Sheet duly powder coated. The gap between the outer and the inner wall is fitted with special grade glass wool to prevent thermal losses. Temp. range 5ᵒC to 60ᵒC with an accuracy of ±1ᵒC .Unit is fitted with air circulation fans for maintaining temperature uniformity throughout the chamber. Fully view inner glass/Acrylic door permits inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door. Unit is fitted with fluorescent illumination lamp inside the chamber (as per customer requirement). Refrigeration unit is formed by compressor. The front panel is provided with separate indicator lamps-cum-switches for Main, Heating and Cooling. Works on 220 / 230 Volt A.C. supply.
BOD Incubators are double walled convection heated units. Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated.. The inner chamber is made of heavy gauge stainless steel sheet of S.S-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our BOD incubators. The unit is provided with two doors , the inner door is made of thick plexi glass/float glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside.. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with castor wheels for easy movement inside the laboratory. The unit is provided with three stainless steel shelves. The triple walled back of our BOD incubators are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber.
Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity. An energy efficient cooling unit is installed in our B.O.D incubators to enable bio chemical demand
studies at lower room temperatures. We use ISI marked high end CFC free compressors.
Temperature range of our standard B.O.D incubator models are 5
0C to 60
0C. However we have the capacity to modify the same to suit the individual specialized requirements of our customers. Temperature inside our BOD incubators are controlled with a sensitivity of + 0.5
0C or better.
Our units are provided with door operated illumination system comprising of fluorescent lights.(OPTIONAL) Front panel of our units comprises of on/off switches heating, cooling and mains indicator lamps, temperature controllers and voltmeters.
| |
Temperature Control
Temperature Sensitivity ± 0C 0.5 or Better
Spatial Deviation in Temperature ± 0C 0.5 or Better
Readability 0C 0.1
Temperature Range 0C 50C to 600C (Standard)
Temperature Sensor – PT -100
Temperature Controller Solid State Digital Controller / PID Optional
Display LED/LCD
Adjustable alarm limits Optional With PID Controller Only
|
| |
Safety Thermostats
Temperature Variation Adjustment – 3 (With PID Controllers Only)
Temperature Sensors – PT-100
Automatic Temperature Setting – Yes (With PID Controllers Only)
Adjustable limits – Yes (With PID Controllers Only)
|
| |
Shelf
Standard – 3
Internal Dimensions mm Model Specific
Maximum Permitted load per Shelves kg 25 kg (As per chamber size)
Maximum permitted total load kg 75 kg
|
| |
Power Consumption – –
Nominal Power W 1050
Nominal Voltage V 220-230 Volts, 50 Hz Single Phase
Frequency Hz 50
|
Universal Digital Data Recorder with Computer
This is unique module which can be incorporated with our BOD incubators to log in temperature and environment related data with a help of a data logger unit which has a pc connectivity by means of RS 232 C interface. This data is then analyzed and formatted with the help of our unique user friendly analysis software to enable the user to get a formatted and analyzed reports of various inputs during the full operation cycle of the equipment. This is an ideal module for pharmaceutical laboratories, process control applications and high research projects where maintaining a viable record of the performance of the equipment is very essential.
| |
Inner chamber size in mm
((W×D×H) |
Capacity
(in cu .ft) |
Capacity
(in ltrs.) |
| A |
455×410×610 |
4 cu .ft. |
112 lt rs |
| B |
505×415×830 |
6.1 cu .ft |
171 ltrs |
| C |
565×565×865 |
10 cu .ft |
280 ltrs |
| D |
650 x 580×900 |
12 cu .ft |
336 ltrs |
| E |
700×650×900 |
15 cu .ft |
420 ltrs |
- Timer 0-24 hours.
- CO2 air mixer nozzle.
- Internal illumination with 3 fluorescent tubes.
- Digital temp. indicator-cum-controller
- Microprocessor PID digital temp. Indicator-cum-controller
- Automatic Voltage Stabilizer 3-5 KVA (Recommended Must)
